LANpoint 7 Vehicle-Mount Hardware Specifications
System |
Choice of OS: Windows CE.NET v4.2 / .NET Compact Framework v1.0 or |
|
Intel 400MHz PXA255 embedded processor |
|
32MB RAM |
|
64MB Flash |
Display |
640 x 240, 350-nit backlit, 64K color LCD |
Keyboard |
Sealed elastomeric, long-life industrial design with epoxy overcoat to protect legends from wear and tear |
Standard Keyboard Configuration |
69-key QWERTY |
Case Design |
tough, impervious plastic face with waterproof/weatherproof/spraydown plasti-coated aluminum housing. |
|
Industrial hose-down, dust-proof housing with infinitely adjustable RAM-mount ball/socket mounting systems. |
Physical |
Exclusive of antenna and any attached options & accessories: 11.2"W x 9.7"H x 3.7"D (28.5cmW x 24.7cmH x 9.4cmD) |
Weight |
Exclusive of any attached options & accessories: 4.75 lbs (2.15 kg) |
Temperature |
Operating & Storage: Standard extended temperature -4° to 131°F (-20° to 55°C) |
Power Requirements |
17.2 - 28 VAC or 17.2 - 35 VDC; external power converters provide 24VDC nominal, from virtually any vehicle power source |
Vibration and Shock |
MIL-STD-810E, mechanical vibration (Method 514.4, Category 1 basic transportation) and (Method 514.4, Category 8 ground mobile). MIL-STD-810E, mechanical shock (Method 516.4, Procedure 1). SAE J 1455 Figures 6,7 & 8. |
Networks Supported |
Windows NT/2000/2003/XP, TCP/IP |
RF Ethernet |
Factory-installed IEEE802.11b/g Wireless Ethernet includes antenna mount, cable, antenna, radio and software support |
|
also supported via standard software/customer-supplied RF card: Sierra Wireless GPRS/GMS/EDGE WAN RF |
Wired Ethernet |
10/100Base-T |
Slot Readers |
Slot readers available: infrared barcode, visible red barcode, or mag stripe |
Automatic ID Interfaces |
three serial COM ports with keyboard data wedge utility program included free; |
Symbologies Decoded |
virtually any if using decoded scanner |
Connectors |
Power |
|
Ethernet 10/100BaseT |
|
COM1, COM2, COM3 with jumper for +5VDC on any or all |
|
external PS/2 keyboard |
|
PS/2 mouse |
|
PCMCIA Type I/II/III (for RF Ethernet card usually) |
|
battery backup |
|
two sets: +3.3 VDC, +5VDC and +12VDC accessory outputs |
|
mounting for external IEEE802.11b/g RF Ethernet antenna |
|
digital I/O (optional) |
|
Compact Flash (unpopulated) |
|
All connectors are internal to the unit and positive-locking for vibration protection, covered with waterproof sealing system for environmental protection |
Network Management Software |
SNMP |
|
remote management capabilities provided by browser-based terminal manager or optional client/server management application |
Status LEDs |
Eight LEDs visible on face of terminal: |
Off-line Storage |
Approximately 32MB data storage for local files and/or off-line operation, upgradable via customer supplied Compact Flash card. |
Accessories and Options - also see Accessories Page for list
Factory Option |
Version of Operating System |
Touchscreen |
Battery Backup |
Digital I/O -8 optically-isolated digital inputs plus your choice of 2, 4, or 8 mechanical relay digital outputs rated for 2 Amps at 250 Volts. Digital inputs provide counter capability to 50 counts per second |
Choice of mounting cases/accessories |
Optional RFID Proximity reader choices can be factory-installed - see Ordering Guide page (slot readers are customer-installed accessories - see Accessories page) |
Lock-down browser |
Text-based terminal emulation software for use with legacy systems |
lanpointcomdate20100311
lanpointcommonth201003
