www.instrument.com - Sunday, September 7, 2008
Printer-friendly version of the page "Serial Communication"
(URL: http://lanpoint.com/ethernet-rs232-serial.html)

EDAS CE 4-Port Serial Module

4-Port Serial RS232 Module for the EDAS CE System

Each EDAS-2008M-1 Serial Port Module provides four RS-232 serial ports. The serial ports are interfaced through 9-pin D-subminiature connectors on the bottom of the unit.

The EDAS-2000E-1/-2/-3 base units can support up to six EDAS-2008M-1 Serial Port Modules for a total of twenty-five COM ports, one COM port located on the base unit and twenty-four COM ports on the six Serial Port Modules.

Click here to request more information about the EDAS CE system

Ordering Information

to view pricing of EDAS-2008M-1, click here

Serial Port Module: EDAS-2008M-1
Parameter	Conditions	Specifications
Serial RS-232C Connector Communication Supply Voltages Baud Rate	3K ohm load	4 Ports DE-9 ASCII, Binary ± 6V TX, RTS Active 300 - 115K Baud
Serial Output Output Voltage Low Output Voltage High	3K ohm load 3K ohm load	-5.0V max +5.0V min
Serial Inputs Input Impedance Input Threshold Low Input Threshold High		3K ohm min, 7K ohm max .08V min 2.4V max
Current Consumption	5VDC	200 mA max
Dimensions	Inches mm	4.55D x 5.9H x 1.74W 116D x 150H x 42W
Operating Temperature Range		0 to 60° C^*
^*All specifications are typical at 25° C unless otherwise noted.

Module Overview

CPU

CPU Modules for the EDAS CE Automation & Control System

Remote Analog I/O - EDASce Analog input module

Analog input modules provide 16 channels each and accept voltage, 4-20 mA and thermocouple signals. Sampling speed up to 200 kHz are ideal for vibration and acoustic applications

Ethernet I/O Data Acquisition: Analog Output Module

Analog output modules provide 8 channels each with +/-10 volts

Digital I/O

A wide range of modules for various voltage ranges, FET or relay output. Special functions: counter, pulse-generator, change-of-state detection; all modules provide channel to channel isolation

Quadrature Decoder, Counter

This 2-channel quadrature decoder and high-speed counter module can be used with shaft encoders or as a high-speed up/down counter

Serial Communication

Serial communication modules provide 4 channels of RS232, with up to 25 serial ports per system

Power Supply

Power supply modules for the EDAS CE offer a wide range of input voltage and auxiliary outputs for additional equipment